Diffused LED Recessed Uplight 350mA

Power Supply

A 350mA power supply is required for this fitting. Please use the chart below to determine which is the correct power supply to use:

1 unit = BULL 350mA 4W
2 - 3 units = DC350mA
4 - 5 units = PTDCC15350MA

For more than 4 fittings, please use more than 1 power supply to cover the load (I.E: 6 units would be 1 x DC350mA and 1 x PTDCC15350MA)

This fitting needs to be wired in series.

If using this fitting is an area which is likely to get wet, such as outdoors, bathrooms, saunas and swimming pools, please ensure that the driver is kept in a waterproof enclosure.

LED Driver Options

• Switching - Use this driver for on/off control. Cannot be used for dimming.
• Dimming - Normal - Use this driver for dimming control. Some dimmers may require a resistive dummy load to meet the minimum load requirements.
• Dimming - 1-10V - Use this driver with a 1-10V dimmer modules or control systems. This type of dimming does not have a minimum load.

For a step-by-step guide to install outdoor ground uplights in the earth, lawn, decking or patio, click here.

When installing recessed ground uplights, standard junction boxes usually won’t fit inside the tight cutout hole drilled into stone or concrete patios. If you are fitting them into timber decking, you will have plenty of void space underneath for easy wiring, but for tight patio installations, you must use a slim, waterproof gel-filled connector like Product Code: 5625/4151125