The Kozma profile can be fixed in pre-made grooves and fitted in drywall using mounting adhesive. Before fixing the profile in drywall, you should take care to lead the power cables out. They can be fed into the profile by cutting a hole in the aluminium or end cap. After the glue dries, cover aluminium collars thinly with a suitable adhesive, put the drywall mesh on, fill all and when dry, polish it in such a way that it does not affect the base edge of the profile. Finally, apply paint over the base edge of the profile.
Make sure to cover the profile with the included working cover while performing the above work. When you have finished, remove the working cover, mount the LEDs, solder the power wires, and finally, put on a clean cover.
General | |
Construction | Aluminium |
Dimensions | |
Depth | 13.5mm |
Length | 1m |
Minimum Ceiling Depth | 11mm |
Width | 56mm |
20 in Stock
74 in Stock
63 in Stock
30 in Stock
170 in Stock
11 in Stock
129 in Stock
This item
Kozma LED Tape Extrusion Profile Plaster-in Aluminium 1000mm
Q4F01
KOZMA 1M
53 in Stock
10% Off
|
Kozma LED Tape Extrusion Profile Plaster-in Aluminium 3000mm
Q6038
KOZMA 3M
only 1 left
10% Off
|
Kozma LED Tape Extrusion Profile Plaster-in Aluminium 2000mm
Q48BB
KOZMA 2M
128 in Stock
10% Off
|
|
---|---|---|---|
Length | 1m | 3m | 2m |