What LED Colour Temperature to Use
Choosing the right Kelvin value transforms the atmosphere and functionality of any space.
Read more
Great garden lighting used to mean an electrician, buried armoured cable and a day of disruption. Plug & Play changes all of that. Our low-voltage 12V system lets you light planting, paths, trees, terraces and walls yourself — pushing spikes into the soil, clicking fittings onto a connector cable and plugging a single safe driver into a standard outdoor socket. It is genuinely that simple, and the results look anything but. Browse our full exterior lighting range to see everything we stock.
Because the whole system runs at a safe 12 volts, there is no requirement for a qualified electrician to make the connections — you can design, install and adjust the scheme entirely yourself, then move or add fittings whenever the garden changes. This guide walks through why Plug & Play works so well, the six product ranges we recommend most, and how the connector system lets you expand a scheme over time.
The appeal of Plug & Play comes down to four things: it is safe, it is simple, it is flexible, and it is cheap to run. Every fitting in the range is sealed to at least IP65, so it shrugs off rain and garden hosing, and the entire circuit operates at low voltage for complete peace of mind around children, pets and water features.
There is no trenching, no junction boxes and no mains wiring to certify. A weatherproof driver plugs into an outdoor socket, a connector lead runs out into the garden, and each fitting simply clicks into a connection point. Spikes push straight into soft ground; wall fittings take a couple of screws. Most gardens are lit in an afternoon.
The connector cables carry multiple plug-in points, so you light what you need now and add more later. Start with a few spikes along a path this spring, extend into the borders next year, then bring a tree to life the year after — all on the same system, with no rewiring.
It suits almost every part of the garden: borders and planting, pathways and steps, terraces and seating areas, specimen trees, and the architectural lighting of walls, fences and raised beds. The fittings come in black, aluminium and a discreet green that disappears into foliage, in warm white (3000K) for a cosy glow or cool white (4000K) for a crisper, more contemporary light.
Not every effect comes from ground level. The LED Hood Wall mounts onto a wall, fence or post and throws an angled, glare-free beam exactly where you want it — grazing a textured wall, washing down a fence line, or picking out a planted bed below. The hooded head can be tilted to aim the light precisely, and because it is Plug & Play it wires into the same connector system as the spikes.
Rated IP65 and finished in black at 5W, it is ideal for boundary lighting, highlighting brick or render, and lighting seating areas from above rather than below. Run from a 60W driver, you can fit up to six on a single circuit.
Browse LED Hood Wall SpotlightsThe LED Ice Spike is the gentlest fitting in the range. Its frosted stem emits a soft 360° ambient glow rather than a hard beam, making it perfect for marking the edges of a path, casting a low wash across a border, or adding subtle points of light through planting. At 3W it is bright enough to read as a feature but soft enough never to dazzle.
Available in black with warm white (3000K) or cool white (4000K) and rated IP65, the Ice Spike works beautifully in clusters along a route or dotted through mixed borders. A companion Ice Hood version adds a dome to direct the light downwards and cut light pollution, ideal where a pure downward wash is wanted on a pathway.
Browse LED Ice Spike RangeIf you buy one fitting to start a scheme, make it the LED Hood 1W. This compact directional spike is ideal for lighting plants, paths, lawns and small trees, and it is the most economical way to add real impact. The hooded head shields the source from view, so you see the effect rather than the glare. A long-stemmed version raises the head above taller plants, bushes and long grass.
Choose from black, aluminium or green finishes, in warm white (3000K) or cool white (4000K), with a 30° beam as standard and a tighter 10° option for picking out a single trunk or feature. An adjustable-head version lets you fine-tune the aim after installation. It is rated IP65, and the 20W driver runs up to six 1W fittings.
Step up to the LED Hood 5W where you need to throw light further — up the trunk of an established tree, across a large specimen plant, or along a wider path or lawn edge. With a focused 23° beam it delivers a punchier, more directional effect than the 1W while keeping the same discreet hooded form and easy Plug & Play installation. A long-stem version is available for lighting from within taller planting and long grass.
Offered in black, aluminium and green with warm white (3000K) output and rated IP65, the 5W is the natural choice for the feature moments in a garden. Run it from a 60W driver, which supports up to six 5W fittings on one circuit.
Browse LED Hood 5W RangeThe LED Hood 8W (also called the LED Hood Large) is the heavyweight of the range. With a 500-lumen output and a tight 15° or wider 30° beam, it is built for the big jobs: tall trees, the full elevation of a building, and broad expanses of lawn or stonework. Its larger multi-LED head delivers serious throw while the hooded design keeps glare under control.
Finished in black with warm white (3000K) output and rated IP65, the 8W is the fitting to reach for when you want architectural drama. Because it draws more power, run up to four from an 80W driver.
Browse LED Hood 8W RangeFor the most flexible scheme of all, the SUB RGBW Spike adds full colour and smart control. Each fitting blends red, green, blue and warm white, so you can shift from a cosy 3000K glow on an ordinary evening to bold colour for a party, the seasons, or simply a change of mood. The smart kit pairs with your phone over Wi-Fi and Bluetooth, letting you set scenes, schedules and brightness from an app.
The anti-glare hooded head keeps the colour clean and the source hidden, and the typical six-fitting smart kit comes ready to plug in with its driver and controller. Use warm white for everyday ambience and save colour for the moments that call for it — uplighting a tree in autumn amber, or bathing a border in cool blue on a summer night.
The clever part of Plug & Play is the connector system that ties it all together. Rather than wiring each fitting individually, you run a single low-voltage lead from the driver out into the garden — and that lead carries several ready-made connection points. You simply click a fitting onto each point; any unused points take a weatherproof cap to keep the rating intact.
Because every connection simply plugs and unplugs, the scheme is never finished — it just evolves. Add a fitting when you plant a new tree, move a spike when the border fills out, or extend the run with another connector cable as the garden matures. There is no rewiring and no electrician required at any stage.
The whole point of garden lighting is the transformation at dusk — and Plug & Play delivers it for pennies. Warm white at 3000K wraps planting, paths and seating in a soft, inviting glow, while a tighter beam picks out the architecture of a tree, a wall or a sculpture. Layer a few effects together — a wash through the borders, an uplit specimen tree, a grazed fence — and an ordinary garden becomes somewhere you want to linger after dark.
Because every fitting is LED, the running costs are tiny. A 1W spike draws barely more power than a phone charger; even a full scheme of six 5W fittings on a 60W driver costs only a few pence an evening to run. LEDs also last for tens of thousands of hours, so there are no bulbs to replace and no maintenance to budget for — you install once and enjoy it for years.
The best schemes mix it up: warm-white spikes for the everyday glow, a couple of higher-output spotlights for the feature trees and walls, and a run of RGBW fittings where you want the option of colour. Put it all on a low-voltage system you can extend yourself, and you have garden lighting that adapts to the space — and the season — for a fraction of the cost of a traditional installation. For more on choosing between warm and cool light, see our colour temperature guide.
Our team are happy to advise on fittings, drivers and connector layouts for your garden. Free initial guidance and full design support — talk to a specifier, not a sales line.