Quara Invisible 350mA Round Low Level Wall Light

The Quara Invisible Round is a hidden wall recessed spotlight used for indirect lighting. Its ideally used to highlight walkways such as corridors, paths and stairs. It has an IP rating of 65 allowing it to be used in bathrooms and outdoors.

Important

Once installed, the Quara MUST be plastered over to completely hide the fitting. Quara Outer Casing should be purchased for easy burial into a wall.

Many different LED power supplies are available that allow you to achieve more with your lighting. Simply select the correct wattage depending on how many total LED fittings it will be connected to.

LED Driver Options

• Switching - Use this driver for on/off control. Cannot be used for dimming.
• Dimming - Normal - Use this driver for dimming control. Some dimmers may require a resistive dummy load to meet the minimum load requirements.
• Dimming - 1-10V - Use this driver with a 1-10V dimmer modules or control systems. This type of dimming does not have a minimum load.

The Invisible range has been designed to be overpainted in Situ in the ceiling if necessary. The fitting is painted RAL9010 - 30% Gloss level which has a slightly matt surface, to which the emulsion or other paints will adhere to. The finish from the factory is good enough for normal use and will blend in with the most common ceiling finishes. The slightly matt finish on the product will allow it to be carefully repainted to suit any other ceiling colours.