Surface Mounted Sensors
Dusk Switch PIR
The Dusk Switch can be surface mounted onto an external wall. It will switch outdoor lights on at dusk and switch them off after a chosen time delay or when is becomes light again, repeating each day. The point at which the lights switch on is controlled by a lux adjuster. The length of time the lights remain on for is set via a time adjuster.
- 6 amps (1500W) Incandescent or mains halogen lamps (recommended with integral safety fuse.
- 4 amps (1000W) Electronic or wire wound transformers. Fluorescent lamps (high frequency or soft start)
- 2 amps (500W) Compact fluorescent or LED lamps (about 50 lamps)
- 1 amp (250W) Most metal halide lamps and fans.
||IP54 - Protection from the amount of dust that would interfere with the operation of the equipment. Protection from splashed water.
||10 lux to 300 lux
||2 hrs to 16 hrs