+
Recessed Sensors
PIR Occupancy Switch
PIR Occupancy Switch
Colour: White Amperage: 0-6A
Quicklink: Q1CA7
79 in stock £47.84 excl.VAT
|
Product Code:
CEFLPIR SEALED
|
Overview
Description
The PIR Flush Mounted Occupancy Switch is a passive infrared switch that will turn on/off any type of connected load, including electronic control gear. Bring lights on only when area is occupied, then automatically turn off after an adjustable set time after the movement was detected. The built in photocell also has an override function which stops the lights coming on whenever there is sufficient daylight. This light level is also adjustable. Please see technical tab for more information.
For suspended or plasterboard ceilings. The sealed plastic construction protects against light splashes and condensation, ideal for bathrooms and shower rooms. The maximum load is 6 amps (240V AC) of any type of load. For larger loads, this product can be used to switch a contactor. For ceilings between 2.2 and 5m in height, a diameter around the sensor of 5m is where the infrared sensor operates at its strongest.
Specification
General |
Colour |
White |
Construction |
Plastic |
Detection Range |
5m |
IP Rating |
IP44 - Protection from entry by solid objects with a diameter or thickness greater than 1.0mm. Protection from splashed water. |
Photocell Range |
100 to 1000 lux |
Time Delay |
10 secs to 40 mins |
Dimensions |
Cable Length |
2m |
Cut Out |
64mm (Diameter) |
Depth |
65mm |
Diameter |
72mm |
Electrical |
Amperage |
6A |
Voltage |
240V AC |