LED Tape Ultra Slim 4mm IP20 5m (36xSMD 2016 LEDs/m) 24V

Anything from a short linear run of light for under cabinet or plinth lighting, shelving or back lighting mirrors to large scale applications such as low level lighting in corridors, dropped ceilings, cove lighting, doorways, handrails and staircases can be achieved. A wide range of extrusions and diffusers are available to suit any location and produce different effects.

LED Tape ultra slim carries an IP20 rating making it only suitable for dry areas. We would recommend using this tape where width is limited, or a very thin line of light is required.

The 5 meter LED tape cannot be extended any further. For lengths of more than 5 meters, you would need to use another ultra slim tape and position them one after another, wiring the power cords back to the driver in parallel. This LED tape also has a cut mark every 33.5mm, meaning you can achieve more precise lengths for your installation. The maximum distance between the power supply and LED tape is 10 meters. We recommend using 1.5mm² cable. The maximum total length is 15 meters for the LED tape and power supply combined.

This LED tape is dimmable and we recommend using the Triac LED Dimming Driver. Ensure the dimming driver you use exceeds the total wattage of the LED Tape.