020 8874 2234 | info@mr-resistor.co.uk FREE DELIVERY on orders over £100 excl. VAT
0
Electronic Time Delay Switch 3 Wire White+

Automatic Light Switches
Electronic Time Delay Switch

Electronic Time Delay Switch
Type: 3 Wire
Colour: White
Quicklink: Q3208
only 2 left £40.49 excl.VAT
Product Code: TIMELAG DS2
Free Delivery on orders over £100 excl. VAT
Linked Items
BackboxesSurface Pattress Boxes
Single Plate Back Box Plastic 16mm Single Plate Back Box Plastic 16mm PABO available to order £3.34excl.VAT
Time ControllersAutomatic Light Switches
Electronic Time Delay Switch Slave White Electronic Time Delay Switch Slave White TIMELAG DSS/N only 5 left £24.89excl.VAT
Wise Controls Wireless LightingSensors Wired
Wise Transmitter 240V 2 Channel Wise Transmitter 240V 2 Channel WISE 2CH PIR MOD 93 due in £59.40excl.VAT
Free Delivery on orders over £100 excl. VAT

Overview

Description

This Electronic Time Delay Switch is a single gang push button delay switch with centre button neon. It replaces a standard single gang plate switch on a box 16mm deep. It is suitable for incandescent lighting up to 1.5kW, 20-200W low voltage and 2000W resistive lighting. Light on times are adjustable from 10 seconds to 10 minutes approximately via a tamperproof potentiometer setting. The illumination guides the user to the push button and once this is pressed, the lights under control are switched on for the period set.

For situations requiring two-way and intermediate switching, an Electronic Time Delay Switch Slave can be used in conjunction with one of these switches. For more information, please click on the technical tab.

For indoor use only. Not suitable for low energy fluorescent lamps. The maximum number of slaves that can be used is ten.

Features

  • 3 wire connection - neutral required
  • Neon button highlights switch in dark areas
  • Replaces any conventional single gang (ON/OFF) light switch
  • Adjustable light on times from 10 seconds to 10 minutes approximately via a protentiometer
  • For use with incandescent lighting up to 1.5kW and 20-200W of low voltage lighting. Not suitable for low energy lamps
  • Unit will switch OFF after preset time even if push button accidentally wedged
  • Delay Time: 10 sec to 10 min (nominal)

Specifications

  • Operating Temperature: -10C to 40C
  • Permissible Loads: Filament lamps - 1.5kW, Low voltage - 20-200W, Resistive - 2kW
  • Standby Consumption: Less than 2 VA
  • Minimum Depth of Wall Box: 16mm

Specification

General
Colour White
Compliance 73/23/EEC, 89/336/EEC
Construction Plastic
IP Rating IP00 - No special protection against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.)
Light ON Time Adjustable 10sec to 10min
Switch Type Single or Double Gang
Dimensions
Depth 20mm
Height 86mm
Width 86mm
Electrical
Maximum Wattage 1500W
Voltage 240V