The DC OTDIM 120W24V is a 10V / 24V power supply which allows LEDs to be dimmed from any 0 - 10V / 1 - 10V dimming system.
Please note: A power supply is required for this product. When using a 12V power supply the maximum load is 50W. When using a 24V power supply the maximum load is 120W.
The DC OTDIM has 2 inputs and 2 outputs. The first input is for the 10V / 24V feed while the second is for the potentiometer. Both outputs are for the load and will sync with each other. This means you WILL NOT be able to control 2 separate circuits from 1 DC OTDIM.
Standard 0/1-10V Dimmer
This is the most popular type of dimmer used with this interface as it is most commonly used in the home and will easily fit into existing back boxes. A 1-10V Wired Dimming Switch and 1-10V High Frequency Dimmer Module for creating your own switch plate are available. See technical tab above for a wiring diagram of dimming TAPE100 with this driver.
Lutron 0/1-10V Dimmer
This wired dimming switch has the same functionality and wiring as the standard 0/1-10V dimmer. Ideal for use where other Lutron switches are used and complimentary switches are required.
Wise Wireless Dimming 0/1-10V
Any Wise switch can be used in conjunction with this interface to control your Seamless DimLine/DimSlim. A WisePack 0-10V Dimming is required and connected between mains and the Feelux interface to receive the wireless signal. This option has the benefit of being able to control your fluorescents wirelessly, without the need for wiring to a fixed switch. Different switch types are available, including a small convenient keyfob switch.
RAKO Wireless Dimming 0/1-10V
Just like the Wise wireless dimming option, a RAKO Wireless Wall Switch can be used to control your fluorescents wirelessly with no need for wiring. A
PIR Sensor Dimming
Alternatively, instead of using a dimmer/switch, a PIR Occupancy Switch sensor could be used which will automatically turn your lights on and off as well as dim them depending on light levels.
General | |
Colour | White |
Construction | Plastic |
Dimmable | Yes |
Maximum 1 Watt LED's | 50 / 120 |
Wiring | Parallel |
Dimensions | |
Height | 20mm |
Length | 172mm |
Maximum LED to Driver Length | 20m |
Width | 42mm |
Electrical | |
Mains Frequency | 1W |
Maximum Wattage | 120W |
Transformer | Electronic |
Voltage | 10-24V |
available to order
only 1 left
181 in Stock
available to order
This item
1-10V Dimmable Interface (Constant Voltage) 50W - 120W 10V-24V
Q1D9A
DC OTDIM 120W24V
£65.76 excl. VAT
£78.91 incl. VAT
available to order |
1-10V / Push Button Dimmable Interface (Constant Voltage) 144W - 288W 12V-24V
Q4AA3
ECP80112A288W
£65.76 excl. VAT
£78.91 incl. VAT
8 in Stock |
1-10V / 24V / RGB Dimmable Interface (Constant Voltage) 120W 24V
Q283C
DC120W24V 122730
£75.95 excl. VAT
£91.14 incl. VAT
45 in Stock |
1-10V Dimmable Interface (Constant Voltage) 50W - 100W 12V - 24V
Q42F6
FDC-L10
£21.84 excl. VAT
£26.21 incl. VAT
available to order |
|
---|---|---|---|---|
Maximum Wattage | 120W | 288W | 120W | 100W |
Voltage | 10-24V | 12-24V | 24V | 24V |