Spectrum Mini Decor RGB 350mA

The fitting is constructed from aluminium and acrylic and incorporates three 3W Cree LED's. It has an opal diffuser which changes colour as the Chameleon cycle is taking place. It is also bright enough, however, to spread light across a room and give a noticeable colour changing effect. A metal spreader is located on the back of the downlight to disperse any heat produced by the LED's.

Wise Chameleon

Two 1m leads are connected to the back of the fitting, one to wire straight to an RGB interface such as our Wise Chameleon Master Dimming pack, with the other connecting to the next LED fitting or to an end cap if it is the last fitting on a run. If used with a Wise Chameleon Master Dimming, the fitting can create a spectrum of over 1000 colours. This is created by mixing the different coloured LEDs together at different times to make other colours. (i.e: Red and Blue mixed together will give purple, Blue and Green will give Cyan, and Green and Red will give Yellow).

The minimum needed to create the colour changing effect is one LED Driver for each WISE Chameleon Master Dimming used, one of these fittings, power cord to connect the fitting to the Wise Chameleon and a Wise Style Switch 7 button wall switch or WisePod Remote 7 button to operate everything. Coupler leads in various sizes are available if larger connecting distances are required between fittings. The Wise range of products communicate wirelessly, therefore no rewiring is required. Please click on the product for more detail. Wise Chameleon Slave packs are also available if you want to wire more than 21W of fittings but want them also to be controlled by the same switch.