RAKO 800V Non-Dimmable Switching Unit

    Switching 800W

    Quicklink
    Product Code RMS800
    • archived / unavailable to order

    The RMS800 is an in-line RF switch module for mains non-dimmable loads. It forms the foundation of of any Rako wireless scene-set system.

    Connected in-line before the first light fitting the RMS800 enables switching of up to 800W. It can be used for extractor fans, LED's and fluorescents.

    Controlled from any Rako Rakom RF device such as the RCP/RCM push button RF wall-plates, RAH hand-helds and Bridge modules.

    It is designed to fit in a ceiling void or cupboard and can also be used for exterior lighting with the use of a weatherproof IP rated enclosure. The module has full rising clamp terminals and mounting bracket for easy installation.

    The RMS800 features a 16 scene memory capacity and manual On/Off control using the set-up button.

    Programmed using RCP/RCM RF wall-plate or RASOFT software it stores the House, Room and Channel address.

    • Dimensions - 138x46x40mm
    • Input Supply - 230V AC +/-10% 50Hz
    • Weight - 205g
    • Housing - ULV0 material
    • Climate Range - Temperature +2C to +40C / Humidity +5% to 95% non condensing
    • Connections - 3 way screw terminals for mains power
    • Protection - Auto resetting over current protection / Auto thermal shutdown / Voltage surge protection
    • Load Types - All non dimmable lighting loads e.g. extractor fans and water pumps.
    • Minimum Load - N/A
    • Maximum Load - 800VA
    • Terminal Sizes - 4mm2
    • Standards - Emissions - EN61000-6-3 : 2001 / Immunity - EN61000-6-1 : 2001
    • Communication - Rakom coded fm radio, 433.9MHz
    • Memory - Flash memory (non volatile)
    General
    Construction Plastic
    Radio Frequency 433.9MHz
    Dimensions
    Depth 47mm
    Height 138mm
    Width 57mm
    Electrical
    Maximum Wattage 800W
    Voltage 240V