The Tape RGB 20m Kit is a plug and play system which allows you to colour change an area of 20m using a radio controlled wireless remote control (included).
The tape comes in twenty 1000mm lengths which can be cut every 165mm, although once a piece of tape has been cut, another piece cannot be attached after it. This basically means any cut bit of tape should be the last piece in the circuit.
Warning: The warm white produced by RGB products is not the same as the warm white produced by single coloured products. By mixing the colours to create warm white a hint of Red, Green, or Blue may appear.
Individual LED's on tapelight can vary in colour. Please connect tapes before installation to test LED colours are the same. We are happy to exchange tapes with colour difference if they have not been installed. Tape which has been installed (i.e stuck down) cannot be returned.
The best way to display RGB products is on a white surface. When projected onto different coloured surfaces and materials the colours can vary.
This application is ideal for small domestic projects such as lighting the shelves of a bookcase, or installing under cabinet lighting in a kitchen. Whatever the intended purpose, the 20m kit will not disappoint.
What if I need more than 10m?
The Wise Chameleon can control up to 180W of tape light before a Slave pack would need to be used. Due to voltage drops the TAPE100 can also only be run in lines of no more than 10 strips (70W), which means that the maximum which can be run off a single Chameleon pack would be 20m. (2 rows of 10 Tapes (140W)
The TAPE100 and the TAPE30 CANNOT be used together due to the different voltages.