80% Off - Last Chance to Buy - last Stock Available

    Waterproof LED Tape RGB Master Kit 24V

    32W 4 metre

    Quicklink
    Product Code TAPERGBWPM4
    • archived (available to order)

    The Tape RGB 4 metre Kit is a plug and play system which allows you to colour change an area of 4 metres using a radio controlled wireless remote control (included).

    Warning: The warm white produced by RGB products is not the same as the warm white produced by single coloured products. By mixing the colours to create warm white a hint of Red, Green, or Blue may appear. Individual LED's on tapelight can vary in colour. Please connect tapes before installation to test LED colours are the same. We are happy to exchange tapes with colour difference if they have not been installed. Tape which has been installed (i.e stuck down) cannot be returned.

    The best way to display RGB products is on a white surface. When projected onto different coloured surfaces and materials the colours can vary.

    The tape comes in four 1 metre lengths which can be cut every 165mm, although once a piece of tape has been cut, another piece cannot be attached after it. This basically means any cut bit of tape should be the last piece in the circuit.

    This application is ideal for small domestic projects such as lighting the shelves of a bookcase, or installing under cabinet lighting in a kitchen. Whatever the intended purpose, the 4 metre kit will not disappoint.


    Controlling the Tape RGB

    The Tape RGB 4 metre Kit is controlled wirelessly using our Wise Chameleon Colour Changing Controller.

    If 2 pieces of tape light require a distance of cable to be between them, then 2 x TAPE PIN SFS30CC need to be purchased. This connects both sides of the coupler to the relavent side of the tape.


    What if I need more than 10 metres?

    The Wise Chameleon can control up to 180W of tape light before a Slave pack would need to be used. Due to voltage drops the TAPE100 can also only be run in lines of no more than 10 strips (70W), which means that the maximum which can be run off a single Chameleon pack would be 20 metres. (2 rows of 10 Tapes (140W)).
    This would mean a 24V power supply of 140W or more would be required. We recommend using our SP20024 to guarantee no voltage drops.

    Important

    The TAPE100 and the TAPE30 CANNOT be used together due to the different voltages.

    General
    Construction Plastic
    IP Rating IP00
    LED per Tape 30
    Maximum Connection 10 Strips
    Dimensions
    Cut Length 165mm
    Height 3mm
    Input Cable Length 400mm
    Length 4m
    Width 10mm
    Electrical
    Maximum Wattage 32W (4 x 8W)
    Voltage 24V
    Light Characteristics
    Watts Per Metre 8 W/m
    LED Tape 100 Power Cord RGB 300mm
    LED Tape 100 Power Cord RGB 300mm
    TAPE PWR RGB100
    Price per item
    £3.00 excl. VAT £3.60 incl. VAT

    available to order

    LED Tape Pin Connector
    LED Tape Pin Connector
    TAPE PIN SFS30CC
    Price per item
    £0.22 excl. VAT £0.26 incl. VAT

    4295 in Stock

    LED Tape Coupler Single Colour / RGB 100mm
    LED Tape Coupler Single Colour / RGB 100mm
    TAPE EXT RGB10
    Price per item
    £2.40 excl. VAT £2.88 incl. VAT

    available to order

    9mm Double Sided Fixing Tape 50m White
    9mm Double Sided Fixing Tape 50m White
    TAPE 9088 9MM
    Price per item
    £10.40 excl. VAT £12.48 incl. VAT

    7 in Stock

    Price per item
    £45.00 excl. VAT £54.00 incl. VAT

    180 in Stock

    Wise Pod Remote 42 Channel White
    Wise Pod Remote 42 Channel White
    WISEPOD42 WHT
    Colour (White)
    Price per item
    £54.00 excl. VAT £64.80 incl. VAT

    12 in Stock