Anything from a short linear run of light for under cabinet or plinth lighting, shelving or back lighting mirrors to large scale applications such as low level lighting in corridors, dropped ceilings, cove lighting, doorways, handrails and staircases can be achieved. A wide range of extrusions and diffusers are available to suit any location and produce different effects. For example a continuous, seamless line of light can be created when mounted in Maxi extrusions combined with Liger diffusers.
To achieve IP64 the tape must be sealed using heat shrink sleeving on the joints.
Each tape is 300mm which must be connected via pins. Up to 12 strips can work simultaneously, with the tape itself being able to cut every 75mm.
This LED tape is dimmable and we recommend using the Triac LED Dimming Driver. Ensure the dimming driver you use exceeds the total wattage of the LED Tape.
General | |
Construction | Plastic |
IP Rating | IP64 |
LED Chip | SMD 5050 |
LED per Tape | 12 |
Dimensions | |
Cut Length | 75mm |
Height | 3mm |
Length | 300mm |
Width | 10mm |
Electrical | |
Maximum Wattage | 2W |
Voltage | 12V |
Light Characteristics | |
Beam Angle | 120° |
Lumens | 91 lm |
Lumens Per Metre | 303 lm/m |
Lumens Per Watt | 46 lm/W |
Watts Per Metre | 6.7 W/m |
4237 in Stock
7 in Stock
86 in Stock
17 in Stock
34 in Stock
76 in Stock
20 in Stock
Save up to 10% with Multi-buy