80% Off - Last Chance to Buy - last Stock Available

    LED Tape 30 RGB 1200mm IR Kit

    4 x 8W 1200mm

    Quicklink
    Product Code TAPE1200mm KIT
    • archived / unavailable to order

    The Tape 1200mm IR Kit allows the user to colour change an area of 1200mm using a remote control and an IR receiver. The Tape light can also be manually trimmed every 75mm to allow for a more snug fit. Be aware though that this should only be done on the last strip on the run as another strip cannot be attached to a cut strip.
    This application is ideal for small domestic projects such as lighting the shelves of a bookcase, or installing under cabinet lighting in a kitchen. Whatever the intended purpose, the 1200mm kit will not disappoint.

    Warning: The warm white produced by RGB products is not the same as the warm white produced by single coloured products. By mixing the colours to create warm white a hint of Red, Green, or Blue may appear.

    The best way to display RGB products is on a white surface. When projected onto different coloured surfaces and materials the colours can vary.

    Kit Contents

    • 4 x TAPE30 RGB: Tape RGB 2W / 300mm
    • 1 x TAPE RGB IR: Tape RGB IR Receiver
    • 1 x TAPE RGB REMOTE: Tape RGB Remote
    • 4 x TAPE SFS30CC: Pin Connector
    • 1 x TAPE DRIVER 24W: Tape Driver Black

    The IR controller can control 12 strips in total before an amplifier is required. A maximum of 12 strips can also be added to the amplifier. This means 24 strips in total, or 7.2m of tape can be run off a single IR Receiver. If a distance of more than 1200mm is required, simply add more strips to your basket. For wiring diagrams on how to set up the tape light system, please download the RGB Tape leaflet by clicking on the 'Download' tab, found directly above the products main picture.

    The Tape light is rated at IP65 meaning is can be used in bathrooms if required, however, heat shrink would need to be purchased to seal joins between tapes. 1 piece of heat shrink is required for each join and can be found on the right hand side of this page.

    Tape light is 2W per strip, this means the kit would equate to 8W in total, Making it one of the brightest forms of LED lighting available.

    General
    Construction Plastic
    IP Rating IP64
    Dimensions
    Cut Length 75mm
    Height 3mm
    Length 300mm
    Width 10mm
    Electrical
    Maximum Wattage 2W
    Voltage 12V
    Light Characteristics
    Beam Angle 120°
    Lumens 91 lm
    Lumens Per Watt 46 lm/W
    LED Tape Light Heat Shrink 20mm
    LED Tape Light Heat Shrink 20mm
    TAPE SHRINK SML
    Price per item
    £0.40 excl. VAT £0.48 incl. VAT

    13 in Stock

    LED Tape Coupler Single Colour / RGB 100mm
    LED Tape Coupler Single Colour / RGB 100mm
    TAPE EXT RGB10
    Price per item
    £2.40 excl. VAT £2.88 incl. VAT

    available to order

    Price per item
    £1.65 excl. VAT £1.98 incl. VAT

    only 2 left

    Price per item
    £10.32 £12.38 £2.06 excl. VAT £2.48 incl. VAT

    86 in Stock

    Price per item
    £20.67 £24.80 £4.13 excl. VAT £4.96 incl. VAT

    17 in Stock

    Wise Chameleon Master Tape30 12V/24V 90W/180W
    Wise Chameleon Master Tape30 12V/24V 90W/180W
    WISERGB TAPE30 M
    Price per item
    £85.00 excl. VAT £102.00 incl. VAT

    34 in Stock

    Wise Chameleon Slave Tape30 12V/24V 180W
    Wise Chameleon Slave Tape30 12V/24V 180W
    WISERGB TAPE30 S
    Price per item
    £68.20 excl. VAT £81.84 incl. VAT

    76 in Stock

    Price per item
    £16.00 excl. VAT £19.20 incl. VAT

    12 in Stock

    Save up to 10% with Multi-buy
    Price per item
    £5.00 excl. VAT £6.00 incl. VAT

    24 in Stock

    Save up to 10% with Multi-buy